XC2440 Uboot移植手册 可以作为Uboot移植的参考
FOXICEforARM附带的pdf,主要介绍了uboot的移植
nandflash256mdram64m网卡dm9000
u-boot-2014-10TX2440A移植
Linux 系统要启动就必须需要一个 bootloader 程序,也就说芯片上电以后先运行一段bootloader 程序。这段 bootloader 程序会先初始化 DDR 等外设,然后将 Linux
本文档对uboot行了比较详细的分析,通过分析和具体移植到gt2440的实例
UBoot源码分析及在S3C2440的移植过程
项目开源地址:https://github.com/Mculover666/uboot-jz2440 0. 教程完整目录 00 – 嵌入式Linux系统中Bootloader的作用和基本运行原理 01
在上一篇文章中初步的移植了 uboot 到JZ2440开发板,参考文章: uboot研读笔记 | 03 – 初步移植uboot 2012.04到JZ2440(修改时钟,配置串口) 在支持Nor Fla
首先,u-boot已经提供了对davinci处理器的支持,目前1.3.3版本中有三个davinci目标板子,分别为:TI的dv-evm,另外两个schmoogie和sonata我也不大清楚是哪个公司的