struts2控制器源代码讲解,详细讲解struts2控制器
公司提供的 I2C 总线控制器是用 FPGA 语言编写的。
本文档是关于i2c总线控制器的verilog程序
微机原理与接口交通信号控制器设计,包含电路图与汇编源码
交通灯控制器源代码,基于VHDL 实现了左行,右行,直行,涉及到有限状态机的使用 文件夹中包含了代码文件、波形文件等
在设计要求中要实现四种状态的自动转换,首先要把这四种状态以数字的形态表示出来。可以用两位二进制数表示所需状态(00—Gr,01—Yr,10—Rg,11—Ry),循环状态:(00—01—10—11—00
1、控制器按东西、南北两个方向控制两组交通灯(红、绿、黄)2、两组灯亮的顺序满足交通安全的规则要求.3、东西向绿灯每次亮30S,接着黄灯亮2S,红灯亮20S;南北向绿灯每次亮28S,接着黄灯亮2S,红
含有protues图和程序(全注释,连变量都注释)要求:1、红灯和绿灯相互转换时经过黄灯,黄灯闪烁三次(6秒);2、主干道方向通行30秒,辅干道方向通行20秒,单独左转信号15秒;先直行信号,后左转
交通控制器拟由单片的CPLD/FPGA来实现,经分析设计要求,拟定整个系统由9个单元电路组成,如图所示。 如图 交通控制器的内部逻辑结构原理图 图中9个单元电路分别为交通灯控制器JTDKZ:根
数字电路-交通灯控制器,超详细的,包括程序,仿真,硬件配置,整体结构图,程序流程图,图文并茂