K2P A2原厂固件 编程器拷贝 亲测好用 刷回原厂固件的好帮手
注意:1, 升级软件必须与当前产品型号和硬件版本一致的软件;2, 升级过程中不能关闭路由器电源,否则可能导致路由器损坏;3, 升级时请使用有线方式连接,不要使用无线方式连接。
tp740 v1编程器固件,解决路由器硬专用,许要编程器
743n原厂固件,英文,可以开发中继,发挥路由器功能
4530原厂编程器固件,需要编辑1FC00和1FE00分别是mac地址和pin码为自己路由器的,当然了,你不改也不是不能用,就是别扭点,DDWRT下可以通过mtd直接刷入到fullflash分区来恢复
WR2041n编程器备份的固件,换闪存前留下的备份,有需要的可以下,需要用编程器写入,不是网页界面升级用的固件
wr941nv2-16Mopenwrt编程器固件
Tp-wr703n original machine 4M programmer firmware
WR702N V1.0恢复出厂设置后的编程器固件 2M 25Q16
磊科737原固件编程器固件从原芯片中导出