该产品可用于采集220KV及以下电压等级的三相交流的电压电流及功率及开关状态和遥控等。提供了完整的原理图和源程序。
1. TDGC TSGC接触调压器(见图1) (1)使用调压器时,先将指针放在0 位上,然后将负载接在输出端,再把输入端接在与调压器输入电压相一致的电源上。调节输出电压时,要缓慢旋转手轮,调至所需
关于互感器的知识问答
本研究聚焦于PLC(可编程逻辑控制器)在三相异步电机控制系统中的设计与应用。通过详细的理论分析和实践案例研究,系统探讨了PLC在三相异步电机控制中的设计原理、工作机制以及实际应用效果。研究发现,PLC
新型三维空间矢量脉宽调制在三相四线系统中的应用三相四线APF,一篇不错的文档
南京宇恒电流互感器的使用doc,南京宇恒电流互感器的使用:电流互感器的接线应遵守串联原则即一次绕阻应与被测电路串联而二次绕阻则与所有仪表负载串联。
导读:随着互感器的迅速发展各个互感器制造厂也不断对产品进行改进和完善,互感器目前在我国已处于成熟阶段。而电压互感器与电流互感器虽然在各个行业领域中都有应用,但是一旦出现故障,将造成严重的损失。所以,本
光电式电流互感器 高压电流互感器是电力系统将电网中的高压信号变换传递为低压小电流信号,从而为系统的计量、监控、继电保护、自动装置等提供统一、规范的电流信号(传统为模拟量,现代为数字量)的装置;同时
功率变送器是一种既能测量有功/无功功率,又能计量有功/无功电能的具有双重功能的仪表,是电能计量、节能自动化和计算机电费结算的配套仪表。本文就立业科技仪器仪表的三相有功/无功功率变送器,介绍功率变送器的
1 引言 在高频开关电源中,需要检测出开关管、电感等元器件的电流提供给控制、保护电路使用。电流检测方法有电流互感器、霍尔元件和直接电阻取样。采用霍尔元件取样,控制和主功率电路有隔离,可以检出直流信号,